Current OTT Navigator documentation describes a Play on TV route that can relay playback through a phone to a discovered television. In that route the phone remains part of the playback path. This differs from simply opening a native TV app, and the receiving TV still needs support for the media format. Treat the phone as an active network component while using that documented relay route. Discovery, relay continuity and receiver decoding are separate requirements, so a found television does not by itself prove the whole playback path will work.
Keep the phone available
If the route uses the phone as a relay, disconnecting it or leaving the local network can interrupt viewing. Do not assume the TV has taken over every part of the session independently. Use the intended phone and receiving television on the same accessible household network, then keep the phone connected and powered throughout the test. A guest network can block discovery even when both devices browse the internet. If playback stops when the phone disconnects, record that sequence before changing provider details; the documented relay path depends on the phone remaining available locally.
Respect receiver capabilities
Relaying does not automatically transcode every codec or make protected media playable. The television’s supported formats remain relevant. Test a representative authorised item and verify both picture and sound at the receiver. The phone can relay the request context without rebuilding the television's supported media decoders. A receiver discovered through the network may still reject a particular video or audio format. Distinguish inability to discover the television from a discovered receiver that fails only when the media begins to play.
Prefer a native app when appropriate
For a supported Android TV device, installing and using the native player can provide a simpler remote-controlled arrangement. Choose the route that the actual devices support. Choose the route appropriate to the devices rather than assuming relay and native installation are interchangeable. A native TV player has its own app support and account setup, while the relay keeps the phone involved. If using a shared television regularly, compare everyday control and recovery needs, including how to stop playback, before relying on a phone that may leave the room or network during viewing.
A practical sequence
0 of 3 steps completed on this page.
An example to work through
A phone that leaves the household network can interrupt a relayed session even though the television itself still has internet access. Keep the phone connected during the comparison and test again with the same item. If the receiver remains discoverable but rejects that media, investigate its supported formats separately from the earlier relay interruption caused by the phone leaving.
Questions about this topic
Does relay automatically convert every unsupported codec?
No. Receiver format support still matters.
Is this identical to running the player natively on the TV?
No. The phone can remain part of the media path.
